1. Measuring accuracy will not be influenced by medium temperature, pressure, viscosity, density and physical parameter; as long as the conductivity of measured medium more than 20μs/cm, and indication will not be influenced by conductivity changes. 2. Wide measuring range, the max flow velocity inside pipe could be any set from 0 m/s to 15 m/s, and output signal and flow will be linear relation. 3. Low requirement to upstream and downstream straight pipe and easier to install. 4. Converter uses 16-digit microprocessor, digital signal processing, with characters of rapid calculation speed, high calculation accuracy, strong anti-interference performance and reliable measurement. 5. Using programmable low frequency excitation method, so flow measurement will be more stable and reliable and lower power consumption; 6. It will display double direction flow automatic measurement, forward and reverse accumulative flow, instantaneous flow, velocity, flow percentage, automatic alarm warning and other parameters; 7. Converter faults self-diagnostic and automatic alarm functions: blank pipe testing alarm, high and low limit flow testing alarm, excitation fault alarm and system fault alarm; 8. Using nonvolatile memory to effectively protect setting parameters and measurement parameters; 9. Using big screen back light LCD display, you could read the data clearly in the sun, hard light or night; 10. Strong converter output functions: 4-20mA, 0-10mA, 0-5V, 0-10V, pulse output and frequency output, and RS485, RS232, HART, MODBUS RTU, PROFIBUS and GPRS GSM wireless remote transfer; |