Product Details
LED Panel purification pretreatmentLED panel clean room purify cleanliness is generally over 10000, local partial requirements 1000, some require constant temperature and humidity.
I
ndoor air clean room installation parameters specification required:
Temperature and humidity requirements |
temperature is generally 23 + 2 ºC, relative humidity of 55 + 5% |
Large fresh air |
to ensure that the amount of fresh air per hour indoor ≥40m3 / h |
Large air |
air flow (ventilation frequency is ≥25 times / h) |
Pressure |
the main workshop adjacent room ≥5Pa |
Average wind speed |
100: 0.3-0.5m / s |
Noise |
≤65dB (A) |
Illuminance |
≥300LX |
Ventilation times |
100,000 ≥18 times; 10000 ≥30 times; 1000≥50 times |
Floor |
use 2mm / 3mm epoxy or PVC flooring, electronic anti-static flooring plant optiona |
Material Airshower
1.Intention: Material Airshower is a necessary passage when materials entering the clean room , it can reduce the pollution problems of Materials brought into the clean room.
2.Process: The electronic interlocking doors of the material airshower , and gas can effect chamber to prevent un-cleaned air into the clean room, reducing dust contamination of the clean room during the cargo out of the clean room . When materials into the airshower, high-speed and efficient clean air filter can be spraied to materials by the injection nozzle in all directions.
3. Purposes: to effectively remove dust particles carried by materials, the air with dust particles and re-cycling by the early HEPA filtered into the airshower area.